top of page
Interdeco logo

Window coverings - Flooring

829.257.8406

Write us through Whatsapp

wa.me/18292578406

  • Facebook Icon
  • Instagram Icon
  • Black YouTube Icon
  • Icono negro LinkedIn

Tel. 809-227-7700

contract@interdeco.do

Self leveling underlayments

Ardex logo.png

For 40 years, Ardex Americas has provided industry-leading innovation and consistent and proven solutions for concrete repair and coating, substrate preparation, flooring installation, or for laying natural stone, ceramic tile, or other flooring materials as well as for the more complex installation problems. We make sure the job gets done right the first time, according to specifications and on schedule, minimizing installation failure and costly overtime.

Henry logo.png

As one of the world's largest adhesive manufacturers for all flooring installations, HENRY® focuses on producing GreenLineTM adhesives, which reduce the environmental impact associated with flooring adhesives.

 

Each coating has its own needs. HENRY adhesives are designed to adhere the indicated coating strongly for excellent installation every time. HENRY products are backed by unmatched customer service, expert technical support, and a comprehensive warranty program.

Autonivelantes

SELF LEVELING UNDERLAYMENTS

Ardex K10 reactivable high flow self leveling underlayment

ARDEX K10™ is a reactivatable, high-flow, self-leveling underlayment that is used to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete prior to the installation of finished flooring – on, above or below grade.

Features:

  • Reactivatable, high-flow material with long healing time.

  • Use to smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating. systems and non-water soluble adhesive residue on concrete.

  • A blend of Portland cement and other hydraulic cements.

  • Installs from 1/8" (3mm) up to 1/2″ (12 mm).

  • Can be tapered to meet existing elevations.

  • Walkable in 2-3 hours.

  • Install moisture-insensitive tile and stone after 6 hours, most other floor coverings after 24 hours (see Installation of Flooring section in Technical Data Sheet for details).

  • Interior use only.

  • 4700psi load.

Arrdex K10.png

Ardex K10

Ardex V1000 self leveling underlayment

ARDEX V 1000™ is a blend of Portland cements, other hydraulic cements and polymers that is used to level and smooth interior concrete and cementitious terrazzo prior to the installation of finished flooring – on, above or below grade.

Features:

  • Use to level and smooth interior concrete and cementitious terrazzo.

  • A blend of Portland cement and other hydraulic cements.

  • Installs from 1/4" (6mm) up to 1 1/4″ (3 cm) neat.

  • Can be tapered to meet existing elevations.

  • Walkable in 4 – 5 hours.

  • Install moisture-insensitive tile and stone after 6 hours, most other floor. coverings after 24 hours (see Installation of Flooring section in Technical Data for details).

  • Interior use only.

  • 4400psi load.

Ardex V1000.png

Ardex V1000

Ardex K60 Arditex water-free self leveling underlayment

ARDEX K 60™ ARDITEX is a blend of Portland cement and other hydraulic cements that is a self-smoothing, trowelable, latex leveling compound with excellent adhesion, flexibility and moisture resistance. ARDEX K 60 can be used to smooth interior concrete, wood, terrazzo, ceramic and quarry tile, steel, select epoxy coating systems and non-water-soluble adhesive residue on concrete prior to the installation of finished flooring on-, above- or below-grade.

Features:

  • Use to level and smooth interior concrete, wood, terrazzo, ceramic and quarry tile, steel, select epoxy coating systems and non-water-soluble adhesive residue on concrete.

  • A blend of Portland cement and other hydraulic cements.

  • No water required for mixing; simply mix with latex additive.

  • No mechanical profiling required (except steel substrates; see below).

  • No priming required (except non-ARDEX epoxy substrates; see below).

  • Trowelable and can smooth floors at 1/8″ (3 mm) or less.

  • Walkable in 2 – 3 hours.

  • Suitable for use under ARDEX MC™ Moisture Control Systems.

  • Interior use only.

  • 3500psi load.

Ardex K60 Arditex.png

Ardex K60 Arditex

Ardex K301 exterior use self leveling compound

ARDEX K 301™ Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above or below grade.

Features:

  • A blend of Portland cements and other hydraulic cements.

  • Smooth new or existing concrete and approved non-porous surfaces.

  • Install from 1/4″ – 3/4″ (6 – 19 mm) neat and up to 2” (5 cm) with aggregate.

  • Walk on in 2 to 3 hours.

  • Freeze-thaw resistant.

  • Suitable for use in wet areas.

  • For commercial, light industrial and residential applications.

  • Use for exterior and interior applications.

  • Suitable for use under the ARDEX MC™ Moisture Control Systems.

  • Can be used as an underlayment prior to installing floor covering.

  • 4300psi load.

Ardex K301.png

Ardex K301

Imprimantes

PRIMERS

Ardex P51 primer for porous substrates

ARDEX P 51™ is a solvent-free primer for the installation of ARDEX underlayments and toppings over absorbent concrete.

Features:

  • For absorbent concrete, wood*, gypsum* and non-water-soluble adhesive residue on concrete*.

  • Concentrated primer – dilutes with water.

  • Seals the substrate.

  • For bonding ARDEX underlayments and toppings to appropriate substrates.

  • For interior use only.

Ardex P51.png

Ardex P51

Ardex P82 non porous substrates primer

A high-strength, solvent-free primer for the installation of ARDEX underlayments over smooth, non-absorbent substrates, such as ceramic, quarry and porcelain tile, terrazzo and metal decking, as well as wood subfloors and non-water-soluble adhesive residues on concrete.

 

Features:

  • For the installation of ARDEX underlayments over non-porous, wood and metal. substrates and adhesive residue on concrete.

  • Waterborne, two-component primer.

  • Use for interior applications only.

Ardex P82.png

Ardex P82

Ardex P4 non porous substrates primer

ARDEX P4™ Pre-Mixed, Rapid-Drying, Multipurpose Primer is a pre-mixed, single-component, rapid-drying, multi-purpose primer for interior and exterior use. The consistency of ARDEX P4 has been formulated to virtually eliminate dripping and splashes. Use prior to the installation of ARDEX Tile & Stone mortars and ARDEX self-leveling underlayments. ARDEX P4 produces a textured surface and can be used on smooth surfaces to create a bond. It is the ideal primer for use in areas that may become damp or wet, such as kitchens, bathrooms, porches, etc.

Features:

  • For use prior to the installation of ARDEX Tile & Stone Installation Systems and most ARDEX Self-Leveling Underlayments.

  • Ideal for Tile over Tile installation.

  • Ready to use (pre-mixed).

  • Dries in as little as 30 minutes.

  • For use over most common substrates.

  • Textured surface for tenacious bond.

  • Drip and splash-free consistency.

  • White color to clearly identify primed areas.

  • Interior and exterior use.

Ardex P4.png

Ardex P4

Ardex EP2000 epoxi primer

ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings.

Features:

  • Two-component epoxy preparation material for the installation of ARDEX. underlayments and toppings.

  • Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings.

  • Required primer for decorative applications of ARDEX self-leveling toppings.

  • Helps to minimize cracking in underlayments and toppings.

  • Can be used as crack filling material.

  • Can be used to provide secondary top-down waterproofing.

  • Solvent-free, low viscosity, 100% solids epoxy resin.

  • Receives sand broadcast.

  • Use for interior and exterior substrates.

Ardex EP2000.png

Ardex EP2000

Instagram | @interdeco_contract

CONTACT

Interdeco logo bco MR.png

Interdeco Contract

Commercial flooring

tel. 809-227-7700 ext. 110, 111

whatsapp. 829-257-8406

wa.me/18292578406

contract@interdeco.do

¡Gracias por contactarnos!

PROJECT GALLERY

Visit our project gallery and see what our products can do for your design. Solutions in window treatments, blinds, shades, window films; also floorcoverings solutions: hardwood, vinyl floors and carpets for corporate, retail, residential and hospitality purposes.

Aplicación autonivelante Ardex K10
Demostración autonivelante Ardex K10
Utilización parchado Ardex GPS
Aplicación autonivelante Ardex K10
Demostración autonivelante Ardex K10
Barrera de humedad Ardex MC Rapid con arena
Aplicación autonivelante Ardex K10
Aplicación autonivelante Ardex K10
Aplicación imprimante Ardex P51
whatsapp logo.png
bottom of page